ESE Exam Schedule/ Important Dates

IES Exam Schedule/ Important Dates

ESE

ESE are the civil services that meet the technical and managerial functions of the Government of India. Like most countries, the Government of India recruits its civil servants and officials on the basis of merit, the middle management positions in the bureaucracy are filled through competitive exams.

IES officers are selected by the union government on the recommendations made by the Union Public Service Commission (UPSC).A combined four-stage competitive examination (comprising six tests), called the Engineering Services Examination (ESE) is conducted by the UPSC for recruitment to the Indian Engineering Services.

ELIGIBILITY

At least a bachelor’s degree in Engineering (B.E./B.Tech./A.M.I.E./B.sc.) from a recognised university or equivalent. M.Sc degree or its equivalent with Wireless Communications, Electronics, Radio Physics or Radio Engineering as special subjects also acceptable for certain services / posts only.

Age limits 21–30 years on 1 august of the year of Engineering Services Examination.

DEPARTMENTS / POSTS

  • Border Roads Engineering Service (Border Roads Organisation)
  • Central Engineering Service (Central Public Works Department)
  • Central Engineering Service (Ministry of Road Transport & Highways)
  • Central Water Engineering Service (Central Water Commission)
  • Indian Defence Service of Engineers (Military Engineer Services)
  • Indian Ordnance Factories Service (IOFS)
  • Indian Railway Service of Engineers
  • Indian Railway Stores Service

SCHEME OF EXAMINATION

Subject Duration Marks
General Ability Test

(Part A: General English)

(Part B: General Studies)

2 hours 200
Civil Objective Paper I 2 hours 200
Civil Objective Paper II 2 hours 200
Civil Conventional Paper I 3 hours 200
Civil Conventional Paper II 3 hours 200
Personality Test 200
Total Marks 1200

IES SYLLABUS

CIVIL ENGINEERING – PAPER-I
1. BUILDING MATERIALS

Timber : Different types and species of structural timber, density-moisture relationship, strength in different directions, defects, influence of defects on permissible stress, preservation, dry and wet rots, codal provisions for design, plywood.

Bricks : Types, Indian Standard classification, absorption, saturationfactor, strength in masonry, influence of morter strength on masonry strength.

Cement : Compounds of, different types, setting times, strength.

Cement Mortar : Ingredients, proportions, water demand, mortars for plastering and masony.

Concrete : Importance of W/C Ratio, Strength, ingredients including admixtures, worksability, testing for strength, elasticity, non-destructive testing, mix design methods.

2. SOLID MECHANICS

Elastic constants, stress, plane stress,Mohr’s circle of stress, strains, plane strain, Mohr’s circle of strain,combined stress; Elastic theories of failure; Simple bending, shear; Torsion of circular and rectangular sections and simple members.

3. STRUCTURAL ANALYSIS

Analysis of determinate structures – different methods including graphical methods. Analysis of indeterminate skeletal frames – moment distribution, slopedeflection,stiffness and force methods,energy methods, Muller-Breslau principleand application.Plastic analysis of indeterminate beams and simple frames – shape factors.

4. DESIGN OF STEEL STRUCTURES

Principles of working stress method. Design of connections, simple members,Built-up sections and frames, Design of Industrial roofs. Principles of ultimate load design. Design of simple members and frames.

5. DESIGN OF CONCRETE AND MASONRY STRUCTURES

Limit state design for bending, shear, axial compression and combined forces. Codal provisions for slabs, beams, walls and footings. Working stress method of design of R.C. members. Principles of prestressed concrete design, materials, methods of prestressing, losses. Design of simple members and determinate structures. Introductions to prestressing of indeterminate structures. Design of brick masonry as per I.S.Codes

6. CONSTRUCTION PRACTICE, PLANNING AND MANAGEMENT

Concreting Equipment: Weight Batcher, Mixer, vibrator, batching plant, concrete pump.

Cranes, hoists, lifting equipment.

Earthwork Equipment : Power shovel, hoe, dozer, dumper, trailers and tractor, rollers, sheep foot rollers, pumps. Construction, Planning and Management : Bar chart, linked bar chart, work-break down structures, Activity – on – arrow diagrams. Critical path, probabilistic activity durations; Event-based networks. PERT network: Time-cost study, crashing; Resource allocation.

CIVIL ENGINEERING – PAPER-II

1 A. FLUID MECHANICS, OPEN CHANNEL FLOW, PIPE FLOW

Fluid Properties, Pressure, Thrust, Buoyancy; Flow Kinematics; Integration of flow equations; Flow measurement; Relative motion; Moment of momentum; Viscosity, Boundary layer and Control, Drag, Lift; dimensional Analysis, Modelling; Cavitation; Flow oscillations; Momentum and Energy principles in Open channel flow, Flow controls, Hydraulic jump, Flow sections and properties; Normal flow, Gradually varied flow; Surges; Flow development and losses in pipe flows, Measurements; Siphons; Surges and Water hammer; Delivery of Power Pipe networks.

1 B. HYDRAULIC MACHINES AND HYDROPOWER

Centrifugal pumps, types, performance parameters, scaling, pumps in parallel; Reciprocating pumps, air vessels, performance parameters; Hydraulic ram; Hydraulic turbines, types, performance parameters, controls, choice; Power house, classification and layout, storage, pondage, control of supply.

2 A. HYDROLOGY

Hydrological cycle, precipitation and related data analyses, PMP, unit and synthetic hydrographs; Evaporation and transpiration; Floods and their management, PMF; Streams and their gauging; River morphology; Routing of floods; Capacity of Reservoirs.

2 B. WATER RESOURCES ENGINEERING

Water resources of the globe: Multipurpose uses of Water: Soil-Plant-Water relationships, irrigation systems, water demand assessment; Storages and their yields, ground water yield and well hydraulics; Waterlogging, drainage design; Irrigation revenue; Design of rigid boundary canals, Lacey s and Tractive force concepts in canal design, lining of canals; Sediment transport in canals; Non-Overflow and overflow sections of gravity dams and their design, Energy dissipators and tailwater rating; Design of headworks, distribution works, falls, cross-drainage works, outlets; River training.

ENVIRONMENTAL ENGINEERING

3 A. WATER SUPPLY ENGINEERING

Sources of supply, yields, design of intakes and conductors; Estimation of demand; Water quality standards; Control of Water-borne diseases; Primary and secondary treatment, detailing and maintenance of treatment units; Conveyance and distribution systems of treated water, leakages and control; Rural water supply; Institutional and industrial water supply.

3 B. WASTE WATER ENGINEERING

Urban rain water disposal; Systems of sewage collection and disposal; Design of sewers and sewerage systems; pumping; Characteristics of sewage and its treatment, Disposal of products of sewage treatment, streamflow rejuvenation Institutional and industrial sewage management; Plumbing Systems; Rural and semi-urban sanitation.

3 C. SOLID WASTE MANAGEMENT

Sources, classification, collection and disposal; Design and Management of landfills.

3 D. AIR AND NOISE POLLUTION AND ECOLOGY

Sources and effects of air pollution, monitoring of air pollution; Noise pollution and standards; Ecological chain and balance, Environmental assessment.

4 A. SOIL MECHANICS

Properties of soils, classification and interrelationship; Compaction behaviour, methods of compaction and their choice; Permeability and seepage, flow nets, Inverted filters; Compressibility and consolidation; Shearing resistance, stresses and failure; soil testing in laboratory and in-situ; Stress path and applications; Earth pressure theories, stress distribution in soil; soil exploration, samplers, load tests, penetration tests.

4 B. FOUNDATION ENGINEERING

Types of foundations, Selection criteria, bearing capacity, settlement, laboratory and field tests; Types of piles and their design and layout, Foundations on expansive soils, swelling and its prevention, foundation on swelling soils.

5 A. SURVEYING

Classification of surveys, scales, accuracy; Measurement of distances – direct and indirect methods; optical and electronic devices; Measurement of directions, prismatic compass, local attraction; Theodolites – types; Measurement of elevations – Spirit and trigonometric leveling; Relief representation; Contours; Digital elevation modelling concept; Establishment of control by triangulations and traversing – measurements and adjustment of observations, computation of coordinates; Field astronomy, Concept of global positioning system; Map preparation by plane tabling and by photo grammetry; Remote sensing concepts, map substitutes.

5 B. TRANSPORTATION ENGINEERING

Planning of highway systems, alignment and geometric design, horizontal and vertical curves, grade separation; Materials and construction methods for different surfaces and maintenance: Principles of pavement design; Drainage.

Traffic surveys, Intersections, signaling: Mass transit systems, accessibility, networking.

Tunnelling, alignment, methods of construction, disposal of muck, drainage, lighting and ventilation, traffic control, emergency management.

Planning of railway systems, terminology and designs, relating to gauge, track, controls, transits, rolling stock, tractive power and track modernisation; Maintenance; Appurtenant works; Containerisation.

Harbours – layouts, shipping lanes, anchoring, location identification; Littoral transport with erosion and deposition; sounding methods; Dry and Wet docks, components and operational Tidal data and analyses.

Airports – layout and orientation; Runway and taxiway design and drainage management; Zoning laws; Visual aids and air traffic control; Helipads, hangers, service equipment.

PAPERWISE : QUALIFYING MARKS (GATE)

Year Paper Code Gate Paper No. of Candidates Appeared Qualifying Marks (Gen0 Qualifying Marks (OBCNCL) Qualifying Marks (SC / ST / PWD)
2017 CE Civil Engineering 1,18,147 28.7 25.8 19.1
2016 CE Civil Engineering 18013 31.00 28.00 22.00
2016 CE Civil Engineering 18013 31.00 28.00 22.00

SUBJECTWISE :

Year SOM SA GT FM I & H RCC DSS HS Env. EV R & A
2017 2 14 7 5 5 8 10 10 15
2 14 7 5 5 8 10 10 15
2016 03 03 15 11 06 05 03 5 10 13 15
2015 06 03 15 11 5 6 4 8 8 13 15
2014 Paper 2 09 07 14 10 04 03 02 15 10 11 15
2014 Paper 1 02 08 12 13 01 07 04 15 10 13 15
2013 06 09 14 09 08 05 05 13 08 08 15
2012 09 00 15 04 11 08 03 12 10 13 15
2011 07 02 15 07 07 08 05 12 09 13 15

Abbreviations used in the Graph / Table :

SOM : Strength of Material
SA : Structural Analysis
GT : Geo Technical
FM : FM & Hydrulic Machine
I & H : Irrigation & Hydrology
RCC : RCC & Prestressed concrete
DSS : Design of Steel Structures
HS : Highway & Serveying
Env. : Environment Engg.
EM : Engineering Maths
R&A : Reasoning & Aptitude

IMPORTANT DATES

Notification of Examination

 

Sept. 29th, 2017

 

Last date for submission of Application Form

 

November 3rd, 2017

 

Fee

 

  1. General/OBC applicants have to pay application fee as Rs.200/- and reserved candidates are exempted from application fee and money has to be deposit in any branch of SBI by cash or by using net banking facility of SBI, State Bank of Bikaner & Jaipur / State bank of Hyderabad/ State Bank of Mysore or by using Visa/Master Credit/Debit Card.

 

Conduct of Examination

 

January 7th,2017

 

Main Exam

 

May 13th,2017

 

Personality test/interview Date

 

1st November to 15th December

 

COURSE DURATION

  • IES- 16 TECHNICAL SUBJECTS
  • GENERAL STUDIES (HISTORY/ POLITY/ GEOGRAPHY/ CURRENT AFFAIRS/ GENERAL SCIENCE)
  • ENGLISH
  • Test Series
  • Interview Guidance

DURATION

  • 1 Year Regular/ Weekend Course
  • 6 Months Crash Course

BOOK INFORMATION

CIVIL ENGINEERING PAPER – 1

S. No. Subject Book Name Author
1. Strength of Materials Strength of Materials Gere & Timoshenko
Strength of Materials R.K.Bansal
Strength of Materials L. Singer
Strength of Materials B.C. Punamia
Strength of Materials E. Popov
2. Theory of Structures / Analysis of Structure Theory of Structures/Analysis of Structure S Ramamrutham
Theory of Structures/Analysis of Structure L.S. Negi & Jangid
Theory of Structures/Analysis of Structure Gupta & Pandit
Theory of Structures/Analysis of Structure S Ramamrutham
3. Steel Design Steel Design S.K. Duggal
Steel Design IS: 800-1984/IS:800:2007
Steel Design L. S. Negi
4. R. C. C. Design R. C. C. Design IS Code: 456-2000
R. C. C. Design A. K. Jain
R. C. C. Design B. C. Punamia
5. CPM & PERT CPM & PERT B.C.Punamia
6. BUILDING MATERIAL Building Material Rangwala

CIVIL ENGINEERING PAPER – 2

S. No. Subject Book Name Author
1. Fluid Mechanics & Fluid Machines Fluid Mechanics & Fluid Machines Modi & Seth
Fluid Mechanics & Fluid Machines R. K. Bansal
Fluid Mechanics & Fluid Machines K. Subramanya
Fluid Mechanics & Fluid Machines A. K. Jain
Fluid Mechanics & Fluid Machines Jagdish Lal
2. Environmental Engg. Environmental Engg. B. C. Punamia Part I & Part II
Environmental Engg. S. K. Garg Part I & Part II
Environmental Engg. Peavy& Rowe
Environmental Engg. Metcalf & Eddy
3. Soil Mechanics & Foundation Engg. Soil Mechanics & Foundation Engg Gopal Ranjan & Rao
Soil Mechanics & Foundation Engg. Venkat Ramaiha
Soil Mechanics & Foundation Engg. K.R.Arora
Soil Mechanics & Foundation Engg. S. K. Garg
Soil Mechanics & Foundation Engg. B. C. Punamia
4. Highway Engg & Surveying Highway Engg Khanna & Justo
Highway Engg Kadiyali
Surveying B.C.Punamia I, II, III
Surveying K.R.Arora
5. Hydrology Engg. Hydrology Engg. K.Subramanyam
6. Irrigation Engg Water Resources S.K. Garg

HOW TO APPLY

Application – Candidates are required to apply online only by using the website www.upsconline.nic.in

Application fee The application fee of the online form for General category male candidates is INR200 , while no fee is required by female and the reserved category applicants.

OUR RESULTS

Here in Eduzphere we all believe that Big results require big ambitions, so we work accordingly to generate excellent results.The very first time in the history of TRICITY (Chandigarh, Panchkula, Mohali) the students that are scoring 1st rank in GATE, competitive examinations and recruitment examinations, belong to our institute. As we have already claimed that we do not have any branch or franchisees, our institute displays the results that are purely produced by us. Some of our Eduz scoring high ranks in IES, GATE, JE, SDE, PSU, and other competitive examinations are:

Notification of Examination

 

Sept. 29th, 2017

 

Last date for submission of Application Form

 

November 3rd, 2017

 

Fee

 

  1. General/OBC applicants have to pay application fee as Rs.200/- and reserved candidates are exempted from application fee and money has to be deposit in any branch of SBI by cash or by using net banking facility of SBI, State Bank of Bikaner & Jaipur / State bank of Hyderabad/ State Bank of Mysore or by using Visa/Master Credit/Debit Card.

 

Conduct of Examination

 

January 7th,2017

 

Main Exam

 

May 13th,2017

 

Personality test/interview Date

 

1st November to 15th December 

 

ENQUIRY FORM

© 2018 EDUZPHERE | All Rights Reserved